101.6MM Stainless Steel SS304 Sanitary SMP-Bc Mixproof Valves with Remote-Controlled Head
Working Principle
SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.
Technical Data
Max.Product Pressure(depanding on valve specification) | 1000kPa(10 bar) |
Max.product Pressure(depanding on valve specification) | 145 PSI (10 bar) |
Min Product Pressure | Full Vacuum |
Temperature Range | 10 ºC~140 ºC(EPDM) |
Temperature Range | 14ºF~284ºF(EPDM) |
Air Pressure | 500-800 kPa(5-8 bar) |
Air Pressure | 72.5-116 PSI(5-8bar) |
Plysical Data
Product Wetted Steel Parts | 1.4401(316L) |
External Surface Finish | Semi-bright(blasted) |
Internal Surface Finish | Bright(polished),Ra<1.6um |
Internal Surface Finish | Bright(polished),Ra<64uinch |
Other Steel Parts | 1.4301(304) |
Product Wetted Seals | EPDM |
Other Seals | NBR |
Valve Body Combination Options
A | Male parts or clamp liners in accordance with required standard |
B | Actuator with strong spring |
C | Larger actuator for valve sizes 38-51mm/DN40-50 |
D | Larger actuator for valve sizes 1 1/2"-2" |
E | CIP installation kits |
F | Other valve body combinations |
G | Surface roughness,product wetted parts:Ra≤0.8μm |
H | Surface roughness,product wetted parts:Ra≤32μin |
I | Product wetted seals of NBR or FPM |
J | Service tools for actuator |
K | Tools for plug seals(Necessary for changing the seals. |
Note | For further details,see also instruction IM 70771 |