Tramp Metal Liquid Line Tube Style T Trap Magnetic Trap
Product Description
Product Description
Magnetic filter, magnet filter in the liquid slurry transport process, the slurry through the filter, by the magnetic effect of the magnetic bar, the iron impurities of slurry are adsorbed on the magnet casing, greatly reducing the iron impurities of the liquid slurry, to ensure that the next process
can effectively control the iron impurity content. A magnetic filter is widely used in pigments, dyes, petrochemicals, pharmaceuticals, food, plastics, and other industries, in the liquid slurry transport process to effectively remove magical metal impurities, reduce the iron ions content of the product, improve product quality.
Magnetic filter with a small size, lightweight, easy installation, and operation advantages.
Advantages of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
Powerful Rare Earth Neodymium Magnets to remove even the smallest ferrous particles from liquids with a higher viscosity.
High-Temperature Rare Earth Magnets are standard for temperatures up to 350℃.
Easy clean. Easy spot checks the magnetic bar for contamination with a unique Clean In Place (CIP) design.
Free maintenance cost.
Reduce production downtime.
Operation of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
As liquids or slurries are pumped through the Liquid Trap separators, ferrous contaminants adhere to the magnetic tubes or magnetic bar. The design and construction allow the tramp iron to go around the downstream side of the tubes where it is safely out of product flow and wash off is prevented. The cleaning job is achieved by removing the top plate and removing the magnetic assembly from the housing. The housing is designed not only to protect the magnet but also to act as a sump, to reach the easy-clean and fast-clean goal.
How to Order?
| Material Quality | SS304, SS316L |
| Available Size | 1-1/2"-20", DN32-DN500, customized size is welcome |
| Connection | Ferrule ends, flange ends, union ends, butt-weld ends, thread ends |
| Magnetic Gauss | 10000gauss ,12000gauss,13000gauss,15000gauss |
| Magnetization Direction | Axial, Radial, Multi-Poles Magnetization |
| Surface Polished | Mirror Polished, matte polished, sand blast |
| Temperature | Standard working temperature≤80ºC, and maximum working temperature can reach 350ºC as required |
| Application | Food, plastic, chemical, rubber, pharmaceutical, ceramic, environmental protection, pigment, fuel and other industries |
Drawing of Liquid Line Magnetic Trap
Disassamble of Magnetic Trap
Different Connection for Magnetic Trap