How can we use the agitator tank?

The stirring tank is used for stirring, mixing, homogenizing of materials. The design structure and configuration of the stainless steel mixing tank can be standardized and humanized according to the requirements of the production process. The mixing tank can realize feed control, discharge control, mixing control and other manual automatic controls during the mixing process.

What are the components of the agitator tank?

What should I pay attention to when installing the agitator tank?

What should we pay attention to when using agitator tanks?

What are the components of the agitator tank?

The structure of the agitator tank: The agitator tank consists of an agitator body, agitator cover, agitator, column, transmission device, shaft sealing device, etc. and a heating or cooling device can also be configured according to the process requirements.

The materials selected for the agitator body, agitator lid, agitator and shaft seal can be carbon steel or stainless steel, depending on the process requirements. The stirring vessel body and the stirring vessel lid can be joined by flanging or welding. The agitator tank body and agitator tank cover can open process line holes such as feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation and safe venting according to the process requirements. The upper part of the mixing tank cover is equipped with a transmission device (motor or reduction gear), and the agitator in the mixing tank is driven by the transmission shaft. The shaft seal device can take different shapes, such as mechanical seal or seal, labyrinth seal (determined according to user's requirements). Due to the different requirements of users in the production process, the mixer can be configured in different shapes such as paddle type, anchor type, frame type and spiral type. If you have other requirements, you can contact our factory for additional design and production.

What should I pay attention to when installing the agitator tank?

1. Please check if the agitator container has been seriously damaged or deformed during transportation, and check whether the fasteners of the equipment are loose or not!

2. Please use pre-cast anchor bolts to install the agitator tank horizontally on a solid foundation.

3. Under the guidance of professionals, please install the equipment, electrical control units and accessories correctly and check whether the pipeline is smooth, whether the installed instruments are correct and whether there is damage. Before starting the device, make sure that the device is surrounded by people or objects that interfere with the normal operation of the device, inside and outside, as well as its surroundings.

What should we pay attention to when using agitator tanks?

1. It should be operated and used strictly according to the working pressure and working temperature calibrated on the type plate of vacuum mixing tank to avoid hazards.

2. Strictly adhere to the regulations on cooling, oil injection, etc. in the instruction manual of the vacuum mixing tank and do a good job in the maintenance and maintenance of the equipment.

3. The usual mixing tanks are mostly atmospheric equipment and operate according to the operating rules of atmospheric equipment.

4. Regularly check the stirring state in the vacuum mixing tank, tighten the loose screws and replace them if necessary. the corresponding parts.

5. Always pay attention to the tank for unusual vibration and noise.

Wenzhou Xusheng Machinery Industry and Trading Co., Ltd was founded in 2011 and is one of the manufacturers able to manufacture high precision stainless steel sanitary equipment and pipeline connection parts. We are a modern company that integrates scientific research and production.