How to use a portable sanitary centrifugal pump?

The portable sanitary centrifugal pumps work by using the rotation of the wheel to cause the water to centrifuge movement. Before starting the water pump, the pump housing and the suction tube must be filled with water and then the engine must be started so that the pump wave drives the wheel and the water to make a high speed turn.The road leads to the pressure water pipeline of portable sanitary circulators.

What is the working principle of portable sanitary centrifugal pumps?

The portable sanitary centrifugal pumps are mainly developed as single-stage circular pumps with low flow and high conveyor height, based on the deficiencies of ordinary single-stage circular pumps with high flow and low conveyor height. The wheel is modified and equipped with small passes to reduce the flow. The portable sanitary centrifugal pump has excellent performance, adequate structure, small volume and reliable use.Circular pumps of the series are suitable for the conveyance of clean liquid materials without solid particles, pure water and other medical products, beverages and alcohol.

What requirements must be met when using a portable sanitary pump?

1.The steering of the drive machine should correspond to that of the portable sanitary centrifugal pump;

2.Find out the direction of the pipe pump and the coaxial pump;

3.No game may be present in each fixed component and the specification and quantity of lubricant added to each lubricant should comply with the requirements of the technical document of the equipment;

4.The parts with lubrication requirements should be prescribed in accordance with the rules;

5.All display instruments and security devices should be sensitive, accurate and reliable;

6.The crank should be flexible and free of abnormalities;

7.The portable sanitary centrifugal pump should be preheated before the test operation.The temperature should rise evenly and the hourly temperature rise should not exceed 50oC;the temperature difference between the pump body surface and the process line with the working environment statement should not exceed 408451and

8.Set up a connection device to eliminate the influence of temperature rise and set up a bypass connection device to provide a cooling water source.

What is the possible cause of a leak in the portable sanitary centrifugal pump?

The shutdown of the portable sanitary centrifugal pump is mainly caused by the failure of the sliding sealing.Most defects are leaks.The reasons for the leakage are as follows:

1.The main reasons for leakage of the seal surface of the dynamic and static ring are: the plane of the end surface, the roughness does not meet the requirements or the surface is scratched;there are particles between the end surfaces that cause the two ends of the portable sanitary centrifugal pump not to work simultaneously;the installation is not available.

2.Portable Hygiene Circle Pump Compensation Ring Sealing Leak, the main reasons being: Stopbook deformation, uneven preload force;incorrect installation;the quality of the sealing does not conform to the standard;the selection of the sealing is wrong.

The Xusheng Valves machine park has been focused for several years on the development and production of portable sanitary centrifugal pumps. And it strives to offer every customer from all over the world a perfect service.