What are the applications of sanitary sampling valves?

The classification of hygienic sampling valves is mainly based on their operating mode, which can be divided into four types: manual, pneumatic, self-resetting and diaphragm sterile sampling valve. They can be sterilized before and after each sampling, and the application areas are basically the same, such as beer, milk, beverage, juice, pharmaceutical and other industries, but the operating method and connection method are different. For more information about sanitary sampling valves, please read the following words.

What are the applications of sanitary sampling valves?

How does a sanitary sampling valve work?

What is the utility value of the sanitary sampling valve?

What are the applications of sanitary sampling valves?

Hygienic sampling valves are equipped with anti-screw-out mechanisms that are more hygienic and reliable than conventional sampling valves. They are mainly used for material sampling in tank installations or pipelines and can also be installed at the lowest point of tank installations or pipelines to drain residual liquid..

sanitary sampling valves are commonly used to take samples from tanks or piping systems under sterile conditions and must be sterilized before and after each sampling. There is no blind spot, sterilization is thorough and aseptic sampling can be carried out continuously and at any time. Widely used in food, wine, beverage, dairy, toothpaste cosmetics, biopharma and other industries.

How does a sanitary sampling valve work?

When the sanitary sampling valve is closed, the sleeve is pressed by spring force or other pressure, and the sealing head is pressed by the sleeve against the opening of the tank wall to achieve the sealing effect; The sampling opening is filled with steam or other sterilization medium, and the entire sample chamber is filled and exported from another sampling opening. After a certain time, the sample chamber and sample port are in a sterile state; then by pulling the handle, the spring is tightened, thimble untied, so that the sealing head detaches from the opening on the tank wall, so that the sample flows from the tank through the sample chamber and is collected by the sampling port; After sampling, turn the handwheel, loosen the spring and close the seal through the thigh again. The adhesive head is pressed against the opening of the tank wall; the residual liquid in the sample chamber is discharged by introducing clean water and then injected into the sterilization medium for sealing and retention until the next sampling.

What is the utility value of the sanitary sampling valve?

sanitary sampling valves are controlled remotely by a drive device or manually operated by a handle. The bacterial sampling valve is used for aseptic sampling from a tank or piping system and can be sterilized before or after each sampling. Aseptic sampling valves are mainly used in industries with high hygiene requirements such as food, beverage, wine making, ultra-pure water, pharmacy, cosmetics, beverages and chemicals.

Xusheng is committed to increasing the number of sanitary sampling valves and making them more effective, reliable and consistent.