101.6MM Stainless Steel SS304 Sanitary SMP-Bc Mixproof Valves with Remote-Controlled Head

You are here: Home » Products » 101.6MM Stainless Steel SS304 Sanitary SMP-Bc Mixproof Valves with Remote-Controlled Head

Share to:

101.6MM Stainless Steel SS304 Sanitary SMP-Bc Mixproof Valves with Remote-Controlled Head

SMP-BC is a sanitary pneumatic seat valve,designed for safety and leak detection when two different products flow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancing pressure spikes offering leakage detection for greater safety.

Availability:

Quantity:



Inquire Add to Basket

SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.

Max.Product Pressure(depanding on valve specification)	1000kPa(10 bar)
Max.product Pressure(depanding on valve specification)	145 PSI (10 bar)
Min Product Pressure	Full Vacuum
Temperature Range	10 ºC~140 ºC(EPDM)
Temperature Range	14ºF~284ºF(EPDM)
Air Pressure	500-800 kPa(5-8 bar)
Air Pressure	72.5-116 PSI(5-8bar)

Max.Product Pressure(depanding on valve specification)	1000kPa(10 bar)
Max.product Pressure(depanding on valve specification)	145 PSI (10 bar)
Min Product Pressure	Full Vacuum
Temperature Range	10 ºC~140 ºC(EPDM)
Temperature Range	14ºF~284ºF(EPDM)
Air Pressure	500-800 kPa(5-8 bar)
Air Pressure	72.5-116 PSI(5-8bar)

Product Wetted Steel Parts	1.4401(316L)
External Surface Finish	Semi-bright(blasted)
Internal Surface Finish	Bright(polished),Ra<1.6um
Internal Surface Finish	Bright(polished),Ra<64uinch
Other Steel Parts	1.4301(304)
Product Wetted Seals	EPDM
Other Seals	NBR

Product Wetted Steel Parts	1.4401(316L)
External Surface Finish	Semi-bright(blasted)
Internal Surface Finish	Bright(polished),Ra<1.6um
Internal Surface Finish	Bright(polished),Ra<64uinch
Other Steel Parts	1.4301(304)
Product Wetted Seals	EPDM
Other Seals	NBR

A	Male parts or clamp liners in accordance with required standard
B	Actuator with strong spring
C	Larger actuator for valve sizes 38-51mm/DN40-50
D	Larger actuator for valve sizes 1 1/2"-2"
E	CIP installation kits
F	Other valve body combinations
G	Surface roughness,product wetted parts:Ra≤0.8μm
H	Surface roughness,product wetted parts:Ra≤32μin
I	Product wetted seals of NBR or FPM
J	Service tools for actuator
K	Tools for plug seals(Necessary for changing the seals.
Note	For further details,see also instruction IM 70771

101.6MM Stainless Steel SS304 Sanitary SMP-Bc Mixproof Valves with Remote-Controlled Head

CATEGORIES

About

Quick Links

Products

Contact