Specification
Standard | SMS,DIN |
Material Contact Parts | SS304/SS316L(1.4301/1.4404) | Provided with material inspection report |
Material Non-contact Parts | SS304(1.4301) | Provided with material inspection report |
Size | 1/2”-4”, DN10-DN100 |
Body Combination | 20 Model,30 Model,11 Model,12Model,21A Model,22A Model,21 Model,22 Model,31Model,32 Model, 111 Model,112 Model,121 Model,122Model,211 Model,212 Model,221 Model,222 Model |
Connection | Butt-weld,Tri-clamp,Male Thread,Female-Male Threaded,Union,Weld-Thread,Flange |
Seal Material | Silicone,EPDM. All seals material comply with FDA21CFR117.2600 |
Power Option | Manual Operated |
SS Pneumatic Actuator |
Position Sensor, C-top Controller, C-top Controller (AS-I) |
Working Pressure | ≤10bar(145psi) |
Supply Pressure for Air Actuator | 5~8(72.52psi~116psi) |
External Surface Treatment | Ra32~64uin(0.8~1.6um) |
Internal Surface Treatment | Ra16~32uin(0.4~0.8um) |
Internal Surface Treatment | Ra16~32uin (0.4~0.8um) |
Highlights at a glance
Pneumatic Control: Air to air double acting for water flow switching
Normally Closed Design: Normally closed type for safe default status
2 Inch Union Ends: 2 inch union ends for easy installation and removal
SS316L Construction: SS316L stainless steel valve body
24CVDC Control Head: Equipped with 24VDC control head
Technical Specifications
Max. pressure: 10bar
Min. pressure: 0.2bar
Temperature range：
EPDM: -5 ~ 212°F(-20 ~ 100℃)
Silicone: -31 ~ 248°F(-35~ 120℃)
FKM:10~ 392°F(-12.2 ~ 200℃)
Other materials are Available upon request
Options
1.The gasket can be Silicone,EPDM. All seals material comply with FDA21CFR117.2600
2.Connection can be Butt-weld,Tri-clamp,Male Thread,Female-Male Threaded,Union,Weld-Thread,Flange
or others upon request.
4. Power operated: Manual,SS Pneumatic Actuator,Position Sensor, C-top Controller,C-top Controller (AS-I)
5.Pneumatic head: Normally Closed(NC)-Air to Open,Spring to Close, Normally Open(NO)-Air to Close,Spring to Open
Design Features
1.Various standards can be provided: SMS,DIN
2.Available in sizes from 1/2”-4”, DN10-DN100
3.Seals comply with FDA 21CFR 177. 2600.
4.The valve body can be customized with a wide selection of different connections.
Quality requirement for compressed air used in actuator
Compressed air connection: Furnish air pipe with air connector R1/8"
Maximum particle size: 0.01mm
Maximum oil content: 0.08ppm
Dew point: 10℃ or lower below atmospheric temparture
Maximum water content: 7.5g/kg
How to Order Diveter Valves?
1.What’s material？ Such as SS304 or SS316L.
2.What’s available size? Such as 1inch to 4inch, DN25 to DN100.
3.What’s connection end? Such as butt-weld, tri-clamp, male threaded or female threaded.
4.What’s body cobmination? Such as 20model, 21model, 30model, 111model.
5.What’s power? Such as manual, pneumatic actuator or 24v control head or intelligent control head.
