The Details of Product
| EPDM,Silicone,FKM,PTFE,NBR |
| -55celsius Degree~250 Celsius Degree |
| 1/2"-12",Dn10-Dn300,12.7mm-304.8mm |
| |
| White,Black,Blue,Grey,Ect |
| |
| Tri Clamp Ferrule,Butterfly Valve,Union |
| Type of Mesh Stainless Steel | 30mesh,40mesh,50mesh,60mesh,80mesh,100mesh,120mesh |
Description of Commodity: Hot Sale Universal 2Inch TC 64MM Sanitary Hygiene Food Grade SMS Aseptic Tri Clamp Transparent Silicone Gasket with Flange Lid
The Functions for Sanitary Silicone Gasket
1.Has excellent heat resistance,cold resistance,ozone resistance,aging resistance
2.Has very good insulation performance
3.The tensile strength is poor and it is not resistant to oil.4.-55Celsius Degree~250 Celsius Degree
The Function for Sanitary EPDM Gasket
1.Has good weather resistance, ozone resistance,water resistance and chemical resistance
2.Used for high temperature water vapor seal
3.-55Celsius Degree~150Celsius Degree
The Function for Sanitary FKM Gasket
1.High temperature resistance than silicone rubber, has excellent weather resistance, ozone resistance and chemical resistance
2.For most oil and solvent resistance
3.-20Celsius Degree~250Celsius Degree
The Function for Sanitary NBR Gasket
1.Suitable for oil system hydraulic oil, glycol system of hydraulic oil, two ester series lubricating oil, gasoline, water, silicone grease, silicone oil and other media use
2.The most widely used, the lowest cost of rubber seals
3.-40Celsius Degree~120Celsius Degree
Advantage of Sanitary Gasket
1.The sealing ring in the work pressure and temperature range, good sealing performance, and with the increase of pressure can improve the sealing performance
2.The friction between the sealing ring and the moving parts of the device must be small, stable friction coefficient
3.Has the advantages of simple structure, convenient use and maintenance, the sealing ring has a longer life
Sealing ring also pays attention to the following conditions
1.Flexibility and elasticity
2..Appropriate mechanical strength, including tensile strength, elongation and tensile strength etc
3.Stable performance, easy to swelling in the medium, heat shrinkage (Joule effect) small
4.Easy processing, and can keep the precision dimension
Usage Conditions
1. The medium is pure air or non corrosive gas.
2.The temperature of the medium is determined by the extreme temperature of the
rubber used.
How to Order ?
1. What material? Such as EPDM, Slicone, PTFE, etc.?
2. What size? Such as 1/4"- 8", DN10 - DN200?
3. What connection? Such as clamp,union?
4. What quantities?
